ISO 9001 Documents – Document Repository
ISO 9001 Standards - Document Repository
All QMS and product realization documents can be stored electronically within the computerize Document Management System like ISO 9001 Document Control Sytem. This provides a set of category and sub-category headings that enable users to drill down intothe different levels of the documentation category tree.QMS documents are created and maintained within a top level category entitled “ISO 9001 Quality Management System (QMS)“. Documents in this category follow a 4-tier approach:• Quality Manual – company scope and process interactions within the QMS• Quality Procedures – responsibilities, controls and activities within the QMS that effect customer service• Records – objective evidence to demonstrate our goal in achieving customer satisfaction• Forms & Reports to support the QMS processesProduct realization documents are stored in categories corresponding to Products, Projects and Departments. Each document is unique, but can be accessed from multiple categories.Documents created within the FablessSemi Inc CogniDox system are assigned a unique identifier using the format “PO-NNNNNN-XX”; where the “PO” prefix identifies them as FablessSemi Inc documents, the “NNNNNN” is an automatically generated and uniquely assigned numerical ID, and the “XX” suffix indicates the document type.All Fabless Semi Inc personnel are responsible for creating document part numbers and uploading documents to an appropriate category. Selected users with additional system privileges are responsible for creating and maintaining document categories.
Showing posts with label iso 9001 documents. Show all posts
Showing posts with label iso 9001 documents. Show all posts
Thursday, September 17, 2009
ISO 9001 Documents – Management Review
ISO 9001 Documents – Management Review
ISO 9001 Standards – Management Review
Review the quality management system at planned intervals to:- Assess possible opportunities for improvementEnsure a suitable, adequate, and effective system
- Evaluate the need for any changes to the system
- Consider the need for changes to the quality policy and objectives
Maintain records of the management reviews.
Inputs for management review must include information on:
- Results of audits
- Customer feedback
- Process performance and product conformity
- Status of preventive and corrective actions
- Follow-up actions from earlier reviews
- Changes that could affect the quality system
- Recommendations for improvement
Outputs from the management review must include any decisions and actions related to:
- Improvement of the effectiveness of the quality management system and its processes
- Improvement of product related to customer requirements
- Resource needs
ISO 9001 Standards – Management Review
Review the quality management system at planned intervals to:- Assess possible opportunities for improvementEnsure a suitable, adequate, and effective system
- Evaluate the need for any changes to the system
- Consider the need for changes to the quality policy and objectives
Maintain records of the management reviews.
Inputs for management review must include information on:
- Results of audits
- Customer feedback
- Process performance and product conformity
- Status of preventive and corrective actions
- Follow-up actions from earlier reviews
- Changes that could affect the quality system
- Recommendations for improvement
Outputs from the management review must include any decisions and actions related to:
- Improvement of the effectiveness of the quality management system and its processes
- Improvement of product related to customer requirements
- Resource needs
ISO 9001 Documents – Design and Development
ISO 9001 Documents – Design and Development
ISO 9001 Standards - Design and Development
Plan and control the product design and development. This planning must determine the:Identify problems and propose any necessary actions
- Stages of design and development
- Appropriate review, verification, and validation activities for each stage
- Responsibility and authority for design and development
The interfaces between the different involved groups must be managed to ensure effective communication and the clear assignment of responsibility. Update, as appropriate, the planning output during design and development.
NOTE: Design and development review, verification, and validation have distinct purposes. They can be conducted and recorded separately or in any combination, as deemed suitable for the product and the organization.
Determine product requirement inputs and maintain records. The inputs must include:
- Functional and performance requirements
- Applicable statutory and regulatory requirements
- Applicable information derived from similar designs
- Requirements essential for design and development
Review these inputs for adequacy. Resolve any incomplete, ambiguous, or conflicting requirements.
Document the outputs of the design and development process in a form suitable for verification against the inputs to the process. The outputs must:
- Meet design and development input requirements
- Provide information for purchasing, production, and service
- Contain or reference product acceptance criteria
- Define essential characteristics for safe and proper use
- Be approved before their release
Perform systematic reviews of design and development at suitable stages in accordance with planned arrangements to:
- Evaluate the ability of the results to meet requirements
- The reviews must include representatives of the functions concerned with the stage being reviewed. Maintain the results of reviews and subsequent follow-up actions.
For more information, please visit http://www.iso9001-standard.us
ISO 9001 Standards - Design and Development
Plan and control the product design and development. This planning must determine the:Identify problems and propose any necessary actions
- Stages of design and development
- Appropriate review, verification, and validation activities for each stage
- Responsibility and authority for design and development
The interfaces between the different involved groups must be managed to ensure effective communication and the clear assignment of responsibility. Update, as appropriate, the planning output during design and development.
NOTE: Design and development review, verification, and validation have distinct purposes. They can be conducted and recorded separately or in any combination, as deemed suitable for the product and the organization.
Determine product requirement inputs and maintain records. The inputs must include:
- Functional and performance requirements
- Applicable statutory and regulatory requirements
- Applicable information derived from similar designs
- Requirements essential for design and development
Review these inputs for adequacy. Resolve any incomplete, ambiguous, or conflicting requirements.
Document the outputs of the design and development process in a form suitable for verification against the inputs to the process. The outputs must:
- Meet design and development input requirements
- Provide information for purchasing, production, and service
- Contain or reference product acceptance criteria
- Define essential characteristics for safe and proper use
- Be approved before their release
Perform systematic reviews of design and development at suitable stages in accordance with planned arrangements to:
- Evaluate the ability of the results to meet requirements
- The reviews must include representatives of the functions concerned with the stage being reviewed. Maintain the results of reviews and subsequent follow-up actions.
For more information, please visit http://www.iso9001-standard.us
ISO 9001 Document – Control of Measuring and Monitoring Equipment
ISO 9001 Document – Control of Measuring and Monitoring Equipment
ISO 9001 Standards - Control of Measuring and Monitoring Equipment
Determine the monitoring and measurements to be made, and the required equipment, to provide evidence of product conformity. Use and control the monitoring and measuring devices to ensure that measurement capability is consistent with monitoring and measurement requirements.
Where necessary to ensure valid results:
- Calibrate and/or verify the measuring equipment at specified intervals or prior to use
- Calibrate the equipment to national or international standards (or record other basis)
- Adjust or re-adjust as necessary
- Identify the measuring equipment in order to determine its calibration status
- Safeguard them from improper adjustments
- Protect them from damage and deterioration
Assess and record the validity of prior results if the device is found to not conform to requirements. Maintain records of the calibration and verification results.
Confirm the ability of software used for monitoring and measuring for the intended application before its initial use (and reconfirmed as necessary).
NOTE: Confirming the ability of software to satisfy the intended application would typically include its verification and configuration management to maintain its suitability for use.
For More Information Please Visit http://www.iso9001-standard.us
ISO 9001 Standards - Control of Measuring and Monitoring Equipment
Determine the monitoring and measurements to be made, and the required equipment, to provide evidence of product conformity. Use and control the monitoring and measuring devices to ensure that measurement capability is consistent with monitoring and measurement requirements.
Where necessary to ensure valid results:
- Calibrate and/or verify the measuring equipment at specified intervals or prior to use
- Calibrate the equipment to national or international standards (or record other basis)
- Adjust or re-adjust as necessary
- Identify the measuring equipment in order to determine its calibration status
- Safeguard them from improper adjustments
- Protect them from damage and deterioration
Assess and record the validity of prior results if the device is found to not conform to requirements. Maintain records of the calibration and verification results.
Confirm the ability of software used for monitoring and measuring for the intended application before its initial use (and reconfirmed as necessary).
NOTE: Confirming the ability of software to satisfy the intended application would typically include its verification and configuration management to maintain its suitability for use.
For More Information Please Visit http://www.iso9001-standard.us
Tuesday, August 18, 2009
Implementing ISO 9000 Quality Management System
Implementing ISO 9000 affects the entire organization right from the start. If pursued with total dedication, it results in ‘cultural transition’ to an atmosphere of continuous improvement.The process of implementing ISO 9000 depends on:???? The sophistication of your existing quality program,???? The size of your organization, and???? The complexity of your process.The 14 essential steps, briefly described below, are to be followed through in order to implement ISO 9000 quality management system successfully.Step 1: Top management commitmentStep 2: Establish implementation teamStep 3. Start ISO 9000 awareness programsStep 4: Provide TrainingStep 5. Conduct initial status surveyStep 6: Create a documented implementation planStep 7. Develop quality management system documentationStep 8: Document controlStep 9. ImplementationStep 10. Internal quality auditStep 11. Management reviewStep 12. Pre-assessment auditStep 13. Certification and registrationStep 14: Continual ImprovementStep 1: Top Management CommitmentThe top management (managing director or chief executive) should demonstrate a commitment and a determination to implement an ISO 9000 quality management system in the organization. Without top management commitment, no quality initiative can succeed. Top management must be convinced that registration and certification will enable the organization to demonstrate to its customers a visible commitment to quality. It should realize that a quality management system would improve overallbusiness efficiency by elimination of wasteful duplication in management system.The top management should provide evidence of its commitment to the development and implementation of the quality management system and continually improve its effectiveness by:a. Communicating to the organization the importance of meeting customer as well as statutory and regulatory requirements,b. Defining the organization’s quality policy and make this known to every employee,c. Ensuring that quality objectives are established at all levels and functions,d. Ensuring the availability of resources required for the development andimplementation of the quality management system,e. Appointing a management representative to coordinate quality management system activities, and Conducting management review.The top management should also consider actions such as:1. Leading the organization by example,2. Participating in improvement projects,3. Creating an environment that encourages the involvement of people.This type of top management commitment may be driven by:1. Direct marketplace pressure: requirements of crucial customers or parentconglomerates.2. Indirect marketplace pressure: increased quality levels and visibility among competitors.3. Growth ambitions: desire to exploit market opportunities.4. Personal belief in the value of quality as a goal and quality management systems as a means of reaching that goal.The top management should identify the goals to be achieved through the quality management system. Typical goals may be:• Be more efficient and profitable• Produce products and services that consistently meet customers’ needs andexpectations• Achieve customers satisfaction• Increase market share• Improve communications and morale in the organization• Reduce costs and liabilities• Increase confidence in the production systemStep 2. Establish Implementation TeamISO 9000 is implemented by people. The first phase of implementation calls for the commitment of top management – the CEO and perhaps a handful of other key people.The next step is to establish implementation team and appoint a ManagementRepresentative (MR) as its coordinator to plan and oversee implementation. Its members should include representatives of all functions of the organization -Marketing, Design and development, Planning, Production, Quality control, etc.In the context of the standard, the MR is the person within the Organization who acts as interface between organization management and the ISO 9000 registrar. His role is, in fact, much broader than that. The MR should also act as the organization’s “quality management system champion,” and must be a person with:
1. Total backing from the CEO,2. Genuine and passionate commitment to quality in general and the ISO 9000 qualitymanagement system in particular,3. The dignity – resulting from rank, seniority, or both – to influence managers and others of all levels and functions,4. Detailed knowledge of quality methods in general and ISO 9000 in particular.The members of the implementation team should also be trained on ISO 9000 quality management systems by a professional training organization.
Step 3. Start ISO 9000 Awareness ProgramsISO 9000 awareness programs should be conducted to communicate to theemployees the aim of the ISO 9000 quality management system; the advantage it offers to employees, customers and the organization; how it will work; and their roles and responsibilities within the system. Suppliers of materials and components should also participate in these programs.The awareness program should emphasize the benefits that the organization expects to realize through its ISO 9000 quality management system. The program should also stress the higher levels of participation and self-direction that the quality management system renders to employees. Such a focus will go far to enlist employee support and commitment.The programs could be run either by the implementation team or by experts hired to talk to different levels of employees.Step 4. Provide TrainingSince the ISO 9000 quality management system affects all the areas and all personnel in the organization, training programs should be structured for different categories of employees – senior managers, middle-level managers, supervisors and workers. The ISO 9000 implementation plan should make provision for this training. The training should cover the basic concepts of quality management systems and the standard and their overall impact on the strategic goals of the organization, the changed processes, and the likely work culture implications of the system. In addition, initial training mayalso be necessary on writing quality manuals, procedures and work instruction; auditing principles; techniques of laboratory management; calibration; testing procedures, etc.When in-house capacity to carry out such training is not available, it may be necessary to participate in external training courses run by professional training organizations.Alternatively, an external training institution could be invited to conduct in-house training courses.
Step 5. Conduct Initial Status SurveyISO 9000 does not require duplication of effort or redundant system. The goal of ISO 9000 is to create a quality management system that conforms to the standard. This does not preclude incorporating, adapting, and adding onto quality programs already in place. So the next step in the implementation process is to compare the organization’s existing quality management system, if there is one — with the requirements of thestandard (ISO 9001:2008).For this purpose, an organization flow chart showing how information actually flows (not what should be done) from order placement by the customer to delivery to this customer should be drawn up. From this over-all flow chart, a flow chart of activities in each department should be prepared.With the aid of the flow charts, a record of existing quality management system should be established. A significant number of written procedures may already be in place.Unless they are very much out of date, these documents should not be discarded.Rather, they should be incorporated into the new quality management system.Documents requiring modification or elaboration should be identified and listed. Thisexercise is some times referred to as ” gap analysis”. During these review processes,wide consultation with executives and representatives of various unions andassociations within the organization is required to enlist their active cooperation.In the review process, documents should be collected, studied and registered for further use, possibly after they have been revised. Before developing new quality management system documentation, you need to consider with which quality requirements or department you should start. The best is to select an area where processes are fairly well organized, running effectively and functioning satisfactorily.The basic approach is to determine and record how a process is currently carried out.We can do this by identifying the people involved and obtaining information from them during individual interviews. Unfortunately, it often happens that different people will give different, contradicting versions of a process. Each one may refer to oral instructions that are not accurate or clear. This is why the facts are often not described correctly the first time around, and have to be revised several times.Once it has been agreed how to describe the current process, this process has to be adapted, supplemented and implemented according to the requirements of the quality standard (ISO 9001:2008). This requires organizational arrangements, the drawing up of additional documents and possible removal of existing documentation (e.g. procedures, inspection/test plans, inspection/test instructions) and records (e.g.inspection/test reports, inspection/test certificates).In introducing a quality management system, the emphasis is on the improvement of the existing processes or the re-organization of processes.In general, the steps to follow are the following:Ascertain and establish the following:What is the present operation/process? What already exists?
Analyze the relevant sections of the quality standard – ISO 9001:2000:What is actually required? If necessary, supplement and change operational arrangements in accordance with the standard, develop documents and records, and describe operations/processes:What is the desired operation/process?Figure 1: Steps in introducing a quality management systemThe above gap analysis can be done internally, if the knowledge level is there. Or aformal pre-assessment can be obtained from any one of a large number of ISO 9000consulting, implementing, and registration firms.Step 6. Create a Documented Implementation PlanOnce the organization has obtained a clear picture of how its quality management system compares with the ISO 9001:2008 standard, all non-conformances must be addressed with a documented implementation plan. Usually, the plan calls for identifying and describing processes to make the organization’s quality management system fully in compliance with the standard.The implementation plan should be thorough and specific, detailing:???? Quality documentation to be developed???? Objective of the system???? Pertinent ISO 9001:2008 section???? Person or team responsible???? Approval required???? Training required???? Resources required???? Estimated completion dateThese elements should be organized into a detailed chart, to be reviewed andapproved. The plan should define the responsibilities of different departments and personnel and set target dates for the completion of activities. Once approved, the Management Representative should control, review and update the plan as the implementation process proceeds.Typical implementation action plan is shown in Figure 2. Use ISO 10005:1995 for guidance in quality planning
Step 7. Develop Quality Management System DocumentationDocumentation is the most common area of non-conformance among organizations wishing to implement ISO 9000 quality management systems. As one company pointed out: “When we started our implementation, we found that documentation was inadequate. Even absent, in some areas. Take calibration. Obviously it’s necessary, and obviously we do it, but it wasn’t being documented. Another area was inspection and testing. We inspect and test practically every item that leaves here, but our documentation was inadequate”.Documentation of the quality management system should include:???? Documented statements of a quality policy and quality objectives,???? A quality manual,???? Documented procedures and records required by the standard ISO 9001:2008, and???? Documents needed by the organization to ensure the effective planning, operation and control of its processes.Quality documentation is generally prepared in the three levels indicated in the box that follows. Use ISO 10013:1995 for guidance in quality documentation.
In small companies, the above levels of documentation could be presented in one manual; otherwise, separate manuals should be prepared.A list of the documents to be prepared should be drawn up and the responsibility for writing the documents should be assigned to the persons concerned in various functional departments. They should be advised to prepare the drafts within a specific time frame.Step 8: Document ControlOnce the necessary quality management system documentation has been generated, a documented system must be created to control it. Control is simply a means of managing the creation, approval, distribution, revision, storage, and disposal of the various types of documentation. Document control systems should be as simple and as easy to operate as possible — sufficient to meet ISO 9001:2008 requirements and that is all.Document control should include:???? Approval for adequacy by authorized person (s) before issue,???? Review, updating and re-approval of documents by authorized person (s),???? Identification of changes and of the revision status of documents,???? Availability of relevant versions of documents at points of use,???? Identification and control of documents of external origin,???? Assurance of legibility and identifability of documents, and???? Prevention of unintended use of obsolete documents.The principle of ISO 9000 document control is that employees should have access to the documentation and records needed to fulfil their responsibilities.Step 9. ImplementationIt is good practice to implement the quality management system being documented as the documentation is developed, although this may be more effective in larger firms. In smaller companies, the quality management system is often implemented all at once throughout the organization. Where phased implementation takes place, the effectiveness of the system in selected areas can be evaluated.It would be a good idea initially to evaluate areas where the chances of a positive evaluation are high, to maintain the confidence of both management and staff in the merits of implementing the quality management system.The implementation progress should be monitored to ensure that the qualitymanagement system is effective and conforms to the standard. These activities include internal quality audit, formal corrective action and management review.Step 10. Internal Quality AuditAs the system is being installed, its effectiveness should be checked by regular internal quality audits. Internal quality audits are conducted to verify that the installed quality management system:
???? Conform to the planned arrangements, to the requirements of the standard (ISO 9001:2008) and to the quality management system requirements established by your organization, and???? Is effectively implemented and maintained.Even after the system stabilizes and starts functioning, internal audits should be planned and performed as part of an ongoing strategy.A few staff members should be trained to carry out internal auditing. Use ISO 19011 for guidance in auditing, auditor qualification and programmes.Step 11. Management ReviewWhen the installed quality management system has been operating for three to six months, an internal audit and management review should be conducted and corrective actions implemented. The management reviews are conducted to ensure the continuing suitability, adequacy and effectiveness of the quality management system.????The review should include assessing opportunities for improvement and the need for changes to the quality management system, including the quality policy and quality objectives.The input to management review should include information on:???? Results of audits,???? Customer feed back,???? Process performance and product conformity,???? Status of preventive and corrective actions,???? Follow-up actions from previous management reviews,???? Changes that could affect the quality management system, and???? Recommendations for improvements.Management reviews should also address the pitfalls to effective implementation, including lack of CEO commitment, failure to involve everyone in the process, and failure to monitor progress and enforce deadlines.Step 12. Pre-assessment AuditWhen system deficiencies are no longer visible, it is normally time to apply for certification. However, before doing so, a pre-assessment audit should be arranged with an independent and qualified auditor. Sometimes certification bodies provide this service for a nominal charge. The pre-assessment audit would provide a degree of confidence for formally going ahead with an application for certification.Step 13. Certification and RegistrationOnce the quality management system has been in operation for a few months and has stabilized, a formal application for certification could be made to a selected certification agency. The certification agency first carries out an audit of the documents (referred to as an “adequacy audit”). If the documents conform to the requirements of the quality standard, then on-site audit is carried out. If the certification body finds the system to be working satisfactorily, it awards the organization a certificate, generallyfor a period of three years. During this three-year period, it will carry out periodic surveillance audits to ensure that the system is continuing to operate satisfactorily.Step 14: Continual ImprovementCertification to ISO 9000 should not be an end. You should continually seek to improve the effectiveness and suitability of the quality management system through the use of:???? Quality policy???? Quality objectives???? Audit results???? Analysis of data???? Corrective and preventive actions???? Management reviewISO 9004:2008 provides a methodology for continual improvement.
1. Total backing from the CEO,2. Genuine and passionate commitment to quality in general and the ISO 9000 qualitymanagement system in particular,3. The dignity – resulting from rank, seniority, or both – to influence managers and others of all levels and functions,4. Detailed knowledge of quality methods in general and ISO 9000 in particular.The members of the implementation team should also be trained on ISO 9000 quality management systems by a professional training organization.
Step 3. Start ISO 9000 Awareness ProgramsISO 9000 awareness programs should be conducted to communicate to theemployees the aim of the ISO 9000 quality management system; the advantage it offers to employees, customers and the organization; how it will work; and their roles and responsibilities within the system. Suppliers of materials and components should also participate in these programs.The awareness program should emphasize the benefits that the organization expects to realize through its ISO 9000 quality management system. The program should also stress the higher levels of participation and self-direction that the quality management system renders to employees. Such a focus will go far to enlist employee support and commitment.The programs could be run either by the implementation team or by experts hired to talk to different levels of employees.Step 4. Provide TrainingSince the ISO 9000 quality management system affects all the areas and all personnel in the organization, training programs should be structured for different categories of employees – senior managers, middle-level managers, supervisors and workers. The ISO 9000 implementation plan should make provision for this training. The training should cover the basic concepts of quality management systems and the standard and their overall impact on the strategic goals of the organization, the changed processes, and the likely work culture implications of the system. In addition, initial training mayalso be necessary on writing quality manuals, procedures and work instruction; auditing principles; techniques of laboratory management; calibration; testing procedures, etc.When in-house capacity to carry out such training is not available, it may be necessary to participate in external training courses run by professional training organizations.Alternatively, an external training institution could be invited to conduct in-house training courses.
Step 5. Conduct Initial Status SurveyISO 9000 does not require duplication of effort or redundant system. The goal of ISO 9000 is to create a quality management system that conforms to the standard. This does not preclude incorporating, adapting, and adding onto quality programs already in place. So the next step in the implementation process is to compare the organization’s existing quality management system, if there is one — with the requirements of thestandard (ISO 9001:2008).For this purpose, an organization flow chart showing how information actually flows (not what should be done) from order placement by the customer to delivery to this customer should be drawn up. From this over-all flow chart, a flow chart of activities in each department should be prepared.With the aid of the flow charts, a record of existing quality management system should be established. A significant number of written procedures may already be in place.Unless they are very much out of date, these documents should not be discarded.Rather, they should be incorporated into the new quality management system.Documents requiring modification or elaboration should be identified and listed. Thisexercise is some times referred to as ” gap analysis”. During these review processes,wide consultation with executives and representatives of various unions andassociations within the organization is required to enlist their active cooperation.In the review process, documents should be collected, studied and registered for further use, possibly after they have been revised. Before developing new quality management system documentation, you need to consider with which quality requirements or department you should start. The best is to select an area where processes are fairly well organized, running effectively and functioning satisfactorily.The basic approach is to determine and record how a process is currently carried out.We can do this by identifying the people involved and obtaining information from them during individual interviews. Unfortunately, it often happens that different people will give different, contradicting versions of a process. Each one may refer to oral instructions that are not accurate or clear. This is why the facts are often not described correctly the first time around, and have to be revised several times.Once it has been agreed how to describe the current process, this process has to be adapted, supplemented and implemented according to the requirements of the quality standard (ISO 9001:2008). This requires organizational arrangements, the drawing up of additional documents and possible removal of existing documentation (e.g. procedures, inspection/test plans, inspection/test instructions) and records (e.g.inspection/test reports, inspection/test certificates).In introducing a quality management system, the emphasis is on the improvement of the existing processes or the re-organization of processes.In general, the steps to follow are the following:Ascertain and establish the following:What is the present operation/process? What already exists?
Analyze the relevant sections of the quality standard – ISO 9001:2000:What is actually required? If necessary, supplement and change operational arrangements in accordance with the standard, develop documents and records, and describe operations/processes:What is the desired operation/process?Figure 1: Steps in introducing a quality management systemThe above gap analysis can be done internally, if the knowledge level is there. Or aformal pre-assessment can be obtained from any one of a large number of ISO 9000consulting, implementing, and registration firms.Step 6. Create a Documented Implementation PlanOnce the organization has obtained a clear picture of how its quality management system compares with the ISO 9001:2008 standard, all non-conformances must be addressed with a documented implementation plan. Usually, the plan calls for identifying and describing processes to make the organization’s quality management system fully in compliance with the standard.The implementation plan should be thorough and specific, detailing:???? Quality documentation to be developed???? Objective of the system???? Pertinent ISO 9001:2008 section???? Person or team responsible???? Approval required???? Training required???? Resources required???? Estimated completion dateThese elements should be organized into a detailed chart, to be reviewed andapproved. The plan should define the responsibilities of different departments and personnel and set target dates for the completion of activities. Once approved, the Management Representative should control, review and update the plan as the implementation process proceeds.Typical implementation action plan is shown in Figure 2. Use ISO 10005:1995 for guidance in quality planning
Step 7. Develop Quality Management System DocumentationDocumentation is the most common area of non-conformance among organizations wishing to implement ISO 9000 quality management systems. As one company pointed out: “When we started our implementation, we found that documentation was inadequate. Even absent, in some areas. Take calibration. Obviously it’s necessary, and obviously we do it, but it wasn’t being documented. Another area was inspection and testing. We inspect and test practically every item that leaves here, but our documentation was inadequate”.Documentation of the quality management system should include:???? Documented statements of a quality policy and quality objectives,???? A quality manual,???? Documented procedures and records required by the standard ISO 9001:2008, and???? Documents needed by the organization to ensure the effective planning, operation and control of its processes.Quality documentation is generally prepared in the three levels indicated in the box that follows. Use ISO 10013:1995 for guidance in quality documentation.
In small companies, the above levels of documentation could be presented in one manual; otherwise, separate manuals should be prepared.A list of the documents to be prepared should be drawn up and the responsibility for writing the documents should be assigned to the persons concerned in various functional departments. They should be advised to prepare the drafts within a specific time frame.Step 8: Document ControlOnce the necessary quality management system documentation has been generated, a documented system must be created to control it. Control is simply a means of managing the creation, approval, distribution, revision, storage, and disposal of the various types of documentation. Document control systems should be as simple and as easy to operate as possible — sufficient to meet ISO 9001:2008 requirements and that is all.Document control should include:???? Approval for adequacy by authorized person (s) before issue,???? Review, updating and re-approval of documents by authorized person (s),???? Identification of changes and of the revision status of documents,???? Availability of relevant versions of documents at points of use,???? Identification and control of documents of external origin,???? Assurance of legibility and identifability of documents, and???? Prevention of unintended use of obsolete documents.The principle of ISO 9000 document control is that employees should have access to the documentation and records needed to fulfil their responsibilities.Step 9. ImplementationIt is good practice to implement the quality management system being documented as the documentation is developed, although this may be more effective in larger firms. In smaller companies, the quality management system is often implemented all at once throughout the organization. Where phased implementation takes place, the effectiveness of the system in selected areas can be evaluated.It would be a good idea initially to evaluate areas where the chances of a positive evaluation are high, to maintain the confidence of both management and staff in the merits of implementing the quality management system.The implementation progress should be monitored to ensure that the qualitymanagement system is effective and conforms to the standard. These activities include internal quality audit, formal corrective action and management review.Step 10. Internal Quality AuditAs the system is being installed, its effectiveness should be checked by regular internal quality audits. Internal quality audits are conducted to verify that the installed quality management system:
???? Conform to the planned arrangements, to the requirements of the standard (ISO 9001:2008) and to the quality management system requirements established by your organization, and???? Is effectively implemented and maintained.Even after the system stabilizes and starts functioning, internal audits should be planned and performed as part of an ongoing strategy.A few staff members should be trained to carry out internal auditing. Use ISO 19011 for guidance in auditing, auditor qualification and programmes.Step 11. Management ReviewWhen the installed quality management system has been operating for three to six months, an internal audit and management review should be conducted and corrective actions implemented. The management reviews are conducted to ensure the continuing suitability, adequacy and effectiveness of the quality management system.????The review should include assessing opportunities for improvement and the need for changes to the quality management system, including the quality policy and quality objectives.The input to management review should include information on:???? Results of audits,???? Customer feed back,???? Process performance and product conformity,???? Status of preventive and corrective actions,???? Follow-up actions from previous management reviews,???? Changes that could affect the quality management system, and???? Recommendations for improvements.Management reviews should also address the pitfalls to effective implementation, including lack of CEO commitment, failure to involve everyone in the process, and failure to monitor progress and enforce deadlines.Step 12. Pre-assessment AuditWhen system deficiencies are no longer visible, it is normally time to apply for certification. However, before doing so, a pre-assessment audit should be arranged with an independent and qualified auditor. Sometimes certification bodies provide this service for a nominal charge. The pre-assessment audit would provide a degree of confidence for formally going ahead with an application for certification.Step 13. Certification and RegistrationOnce the quality management system has been in operation for a few months and has stabilized, a formal application for certification could be made to a selected certification agency. The certification agency first carries out an audit of the documents (referred to as an “adequacy audit”). If the documents conform to the requirements of the quality standard, then on-site audit is carried out. If the certification body finds the system to be working satisfactorily, it awards the organization a certificate, generallyfor a period of three years. During this three-year period, it will carry out periodic surveillance audits to ensure that the system is continuing to operate satisfactorily.Step 14: Continual ImprovementCertification to ISO 9000 should not be an end. You should continually seek to improve the effectiveness and suitability of the quality management system through the use of:???? Quality policy???? Quality objectives???? Audit results???? Analysis of data???? Corrective and preventive actions???? Management reviewISO 9004:2008 provides a methodology for continual improvement.
Monday, August 10, 2009
ISO 9001:2008 Documentation Requirements
ISO 9001:2008 clause 4.1 General requirements requires an organization to “establish, document, implement, and maintain a quality management system and continually improve its effectiveness in accordance with the requirements of this International Standard”
ISO 9001:2008 Clause 4.2.1 General explains that the quality management system documentation shall include:
documented statements of a quality policy and quality objectives;
a quality manual
documented procedures required by this International Standard
documents needed by the organization to ensure the effective planning, operation and control of its processes, and
records required by this International Standard;
The notes after Clause 4.2 make it clear that where the standard specifically requires a “documented procedure”, the procedure has to be established, documented, implemented and maintained. It also emphasizes that the extent of the QMS documentation may differ from one organization to another due to:
the size of organization and type of activities;
the complexity of processes and their interactions, and
the competence of personnel.
All the documents that form part of the QMS have to be controlled in accordance with clause 4.2.3 of ISO 9001:2008, or, for the particular case of records, according to clause 4.2.4.
Guidance on Clause 4.2 of ISO 9001:2008
The following comments are intended to assist users of ISO 9001:2008 in understanding the intent of the general documentation requirements of the International Standard.
a) Documented statements of a quality policy and objectives:
Requirements for the quality policy are defined in clause 5.3 of ISO 9001:2008. The documented quality policy has to be controlled according to the requirements of clause 4.2.3.Note: Organizations that are revising their quality policy for the first time, or in order to meet the amended requirements in ISO 9001:2008, should pay particular attention to clause 4.2.3 (c), (d) and (g).
Requirements for quality objectives are defined in clause 5.4.1 of ISO 9001:2008. These documented quality objectives are also subject to the document control requirements of clause 4.2.3.
b) Quality Manual:
Clause 4.2.2 of ISO 9001:2008 specifies the minimum content for a quality manual. The format and structure of the manual is a decision for each organization, and will depend on the organization’s size, culture and complexity. Some organizations may choose to use the quality manual for other purposes besides that of simply documenting the QMS
A small organization may find it appropriate to include the description of its entire QMS within a single manual, including all the documented procedures required by the standard.
Large, multi-national organizations may need several manuals at the global, national or regional level, and a more complex hierarchy of documentation.
The quality manual is a document that has to be controlled in accordance with the requirements of clause 4.2.3.
c) Documented procedures:
ISO 9001:2008 specifically requires the organization to have “documented procedures” for the following six activities:4.2.3 Control of documents4.2.4 Control of records8.2.2 Internal audit8.3 Control of nonconforming product8.5.2 Corrective action8.5.3 Preventive action
These documented procedures have to be controlled in accordance with the requirements of clause 4.2.3
Some organizations may find it convenient to combine the procedure for several activities into a single documented procedure (for example, corrective action and preventive action). Others may choose to document a given activity by using more than one documented procedure (for example, internal audits). Both are acceptable.
Some organizations (particularly larger organizations, or those with more complex processes) may require additional documented procedures (particularly those relating to product realization processes) to implement an effective QMS.
Other organizations may require additional procedures, but the size and/or culture of the organization could enable these to be effectively implemented without necessarily being documented. However, in order to demonstrate compliance with ISO 9001:2008, the organization has to be able to provide objective evidence (not necessarily documented) that its QMS has been effectively implemented.
d) Documents needed by the organization to ensure the effective planning, operation and control of its processes:
In order for an organization to demonstrate the effective implementation of its QMS, it may be necessary to develop documents other than documented procedures. However, the only documents specifically mentioned in ISO 9001:2008 are:- Quality policy (clause 4.2.1.a)- Quality objectives (clause 4.2.1.a)- Quality manual (clause 4.2.1.b)
There are several requirements of ISO 9001:2008 where an organization could add value to its QMS and demonstrate conformity by the preparation of other documents, even though the standard does not specifically require them. Examples may include:- Process maps, process flow charts and/or process descriptions- Organization charts- Specifications- Work and/or test instructions- Documents containing internal communications- Production schedules- Approved supplier lists- Test and inspection plans- Quality plans
All such documents have to be controlled in accordance with the requirements of clause 4.2.3 and/or 4.2.4, as applicable
e) Records:
Examples of records specifically required by ISO 9001:2008 are presented in Annex B.
Organizations are free to develop other records that may be needed to demonstrate conformity of their processes, products and quality management system.
Requirements for the control of records are different from those for other documents, and all records have to be controlled according to those of clause 4.2.4 of ISO 9001:2008.
ISO 9001:2008 Clause 4.2.1 General explains that the quality management system documentation shall include:
documented statements of a quality policy and quality objectives;
a quality manual
documented procedures required by this International Standard
documents needed by the organization to ensure the effective planning, operation and control of its processes, and
records required by this International Standard;
The notes after Clause 4.2 make it clear that where the standard specifically requires a “documented procedure”, the procedure has to be established, documented, implemented and maintained. It also emphasizes that the extent of the QMS documentation may differ from one organization to another due to:
the size of organization and type of activities;
the complexity of processes and their interactions, and
the competence of personnel.
All the documents that form part of the QMS have to be controlled in accordance with clause 4.2.3 of ISO 9001:2008, or, for the particular case of records, according to clause 4.2.4.
Guidance on Clause 4.2 of ISO 9001:2008
The following comments are intended to assist users of ISO 9001:2008 in understanding the intent of the general documentation requirements of the International Standard.
a) Documented statements of a quality policy and objectives:
Requirements for the quality policy are defined in clause 5.3 of ISO 9001:2008. The documented quality policy has to be controlled according to the requirements of clause 4.2.3.Note: Organizations that are revising their quality policy for the first time, or in order to meet the amended requirements in ISO 9001:2008, should pay particular attention to clause 4.2.3 (c), (d) and (g).
Requirements for quality objectives are defined in clause 5.4.1 of ISO 9001:2008. These documented quality objectives are also subject to the document control requirements of clause 4.2.3.
b) Quality Manual:
Clause 4.2.2 of ISO 9001:2008 specifies the minimum content for a quality manual. The format and structure of the manual is a decision for each organization, and will depend on the organization’s size, culture and complexity. Some organizations may choose to use the quality manual for other purposes besides that of simply documenting the QMS
A small organization may find it appropriate to include the description of its entire QMS within a single manual, including all the documented procedures required by the standard.
Large, multi-national organizations may need several manuals at the global, national or regional level, and a more complex hierarchy of documentation.
The quality manual is a document that has to be controlled in accordance with the requirements of clause 4.2.3.
c) Documented procedures:
ISO 9001:2008 specifically requires the organization to have “documented procedures” for the following six activities:4.2.3 Control of documents4.2.4 Control of records8.2.2 Internal audit8.3 Control of nonconforming product8.5.2 Corrective action8.5.3 Preventive action
These documented procedures have to be controlled in accordance with the requirements of clause 4.2.3
Some organizations may find it convenient to combine the procedure for several activities into a single documented procedure (for example, corrective action and preventive action). Others may choose to document a given activity by using more than one documented procedure (for example, internal audits). Both are acceptable.
Some organizations (particularly larger organizations, or those with more complex processes) may require additional documented procedures (particularly those relating to product realization processes) to implement an effective QMS.
Other organizations may require additional procedures, but the size and/or culture of the organization could enable these to be effectively implemented without necessarily being documented. However, in order to demonstrate compliance with ISO 9001:2008, the organization has to be able to provide objective evidence (not necessarily documented) that its QMS has been effectively implemented.
d) Documents needed by the organization to ensure the effective planning, operation and control of its processes:
In order for an organization to demonstrate the effective implementation of its QMS, it may be necessary to develop documents other than documented procedures. However, the only documents specifically mentioned in ISO 9001:2008 are:- Quality policy (clause 4.2.1.a)- Quality objectives (clause 4.2.1.a)- Quality manual (clause 4.2.1.b)
There are several requirements of ISO 9001:2008 where an organization could add value to its QMS and demonstrate conformity by the preparation of other documents, even though the standard does not specifically require them. Examples may include:- Process maps, process flow charts and/or process descriptions- Organization charts- Specifications- Work and/or test instructions- Documents containing internal communications- Production schedules- Approved supplier lists- Test and inspection plans- Quality plans
All such documents have to be controlled in accordance with the requirements of clause 4.2.3 and/or 4.2.4, as applicable
e) Records:
Examples of records specifically required by ISO 9001:2008 are presented in Annex B.
Organizations are free to develop other records that may be needed to demonstrate conformity of their processes, products and quality management system.
Requirements for the control of records are different from those for other documents, and all records have to be controlled according to those of clause 4.2.4 of ISO 9001:2008.
Subscribe to:
Posts (Atom)